Positive and Negative Meniscus Lenses, Made in Rye
Kingsview Optical makes custom meniscus lenses to your drawing for OEMs, instrument makers and research labs, from 0.8mm to 100mm. We polish them on our Optotech CNC lines in Rye, including meniscus lenses with near-equal radii, and coat and measure them on the same site.
- Made in Rye, East Sussex
- CNC polished in Rye
- Coated in-house
- ISO 9001:2015

What a Meniscus Lens Does
In short: a meniscus lens has one convex and one concave surface, curving the same way. A positive meniscus is thicker at the centre and focuses light; a negative meniscus is thicker at the edge and diverges it.
Meniscus lenses are mostly used alongside other lenses. Adding a positive meniscus after a plano convex lens shortens the focal length and increases the numerical aperture without adding as much spherical aberration as a stronger single lens, giving a tighter focus.
They are common in multi-element objectives, condensers and laser focusing optics, where the designer uses the bending of the lens to control aberrations.
When the two radii are close to equal, there is almost no net polishing power, so the lens can't be polished conventionally. We make these on our CNC lines, which needs custom tooling.

Where Our Meniscus Lenses Are Used
Meniscus Lens Specification
These are our standard tolerances. If your design needs tighter, tell us which parameter. We'll tell you honestly whether we can hold it, and what it adds to cost.
| Diameter range | 0.8mm to 100mm |
|---|---|
| Diameter tolerance | +0 / −0.05mm |
| Centre thickness tolerance | ±0.05mm |
| Radius tolerance | 0.5% of radius or better |
| Irregularity | λ/4 |
| Centration (wedge) | ±2 arcmin |
| Surface quality (scratch-dig) | 60/40 |
| Materials | Schott, Ohara and CDGM optical glass; fused silica |
| Coatings | Broadband AR (standard 425 to 650nm, wider on request), V-coat, single-layer MgF2, custom designs |
| Edge finishing | Blackened edges, steps, bevels, flats, controlled apertures |
Not sure what to specify? For meniscus lenses, centre thickness and centration matter most, because small errors change the lens power. Send the design and we'll help you check.
Made to Fit Your System
Meniscus Lens Questions
What is the difference between a positive and a negative meniscus lens?
Why add a meniscus lens to a system?
Can you make meniscus lenses with almost equal radii?
Which way round should a meniscus lens face?
What do you need to quote?
Other Lenses We Manufacture
Or see our full precision optical lens manufacturing capability, and our optical design service if you need a lens designed.
Getting a Quote for Meniscus Lenses
Send us your drawing or lens design data. An engineer from the team that would make your lenses, not a sales team, will review it. They'll tell you plainly what's achievable and what will drive cost.
What to send
- Diameter, both radii and centre thickness, or a drawing (PDF or ISO 10110)
- Glass type and wavelength
- Centration and surface tolerances
- Coating requirement
- Quantities: prototypes and expected production volumes
What happens next
- An engineer reviews itWithin one working day, flagging anything that will drive cost or lead time.
- We quote the lensFor the prototype, and for production at your volumes.
- We make, measure and deliverAll in Rye, with inspection data if you need it.
Need a Custom Meniscus Lens?
Send your drawing or lens design data. We'll tell you honestly how we'd make it, what it will cost and how long it will take.
Made in Rye, East Sussex. NDA-friendly. Defence and security work welcome. ISO 9001:2015.